Jessberger JP-07
SubCategory: DrumPumps
Manufacturer: Jessberger
Industry:
Product features
- Polypropylene pump body → matches the construction to the intended duty
- Nbr, epdm or fkm seal versions → provides a verified basis for safe product selection
- Up to 20 l/min with water in siphon operation → supports practical integration into the transfer task
- Up to 9 l/min with sae 30 oil at 20 °c → gives engineers a defined operating reference
- Maximum stated viscosity 400 mpas → helps screen the product against process requirements
- Maximum stated temperature 40 °c → supports application-specific configuration
- For 20-200 litre containers and drums → supports predictable maintenance planning
- Jessberger modular pump system → lets the drive and pump tube be selected for the same application
- Serviceable components → help maintenance teams replace wear parts without replacing the complete transfer system
- AxFlow selection and spare-parts support → helps verify the correct configuration before purchase or replacement
Jessberger JP-07 is a manual dispensing and transfer pump used where reliable transfer from drums, containers or process vessels must be matched to the liquid and operating environment. It is intended for diesel and mineral-oil products, alkaline media or light acids depending on the selected seal version. Selecting the correct pump tube, seals, connections and safety measures is essential because the drive or hand pump is only one part of the complete transfer arrangement.
The current Jessberger configuration is defined by polypropylene pump body, NBR, EPDM or FKM seal versions and up to 20 l/min with water in siphon operation. These details determine how the product should be integrated and what operating envelope is realistic. The design also allows users to build pressure for controlled dispensing or operate as a siphon pump for continuous transfer, which can improve handling, dosing or process control depending on the application.
Verified current data includes up to 9 l/min with SAE 30 oil at 20 °C; maximum stated viscosity 400 mPas; maximum stated temperature 40 °C; for 20-200 litre containers and drums. These figures are manufacturer maximums or configuration-dependent values and should not be treated as guaranteed duty points for every pump tube or liquid. AxFlow can help check viscosity, density, chemical compatibility, hazardous-area requirements and required flow/head before the final configuration is selected.
For maintenance teams, the modular Jessberger approach allows drives, pump tubes and service parts to be considered separately. This can simplify fault isolation and replacement of wear components while protecting the installed transfer arrangement. AxFlow can support product selection, spare-parts identification and replacement planning to help reduce avoidable downtime and lifecycle cost.
