Micropump CA
SubCategory: CentrifugalPumps
Manufacturer: Micropump
Industry:
Let us help you find the right product from this series
Key Specifications
- Flows up to 29.5 l/min
Product features
- Integrated impeller-and-magnet assembly → reduces rotating-part count and simplifies the hydraulic end
- 316 stainless-steel and PTFE wetted construction → supports chemical and abrasion resistance for suitable fluids
- Verified operating envelope → 4.3–24 L/min, head up to 5.59 m and system pressure up to 14 bar provides a factual basis for initial duty screening
- Magnetic-drive containment → removes a conventional dynamic shaft seal from the liquid path and reduces a common leakage and wear point
- Compact pump architecture → supports integration into OEM equipment, analytical instruments and space-constrained process skids
- Application-specific material selection → lets wetted materials be checked against the actual process liquid before ordering
- Defined operating limits → checking pressure, temperature, viscosity and suction conditions reduces the risk of incorrect selection
- Service-oriented construction → supports planned maintenance and replacement of wear components instead of reactive intervention
- Configuration and drive options → allow the pump and drive arrangement to be matched to the required duty and installation
- AxFlow selection support → helps confirm the correct series, configuration and service reference before purchase
Micropump CA is a magnetic-drive centrifugal pump for higher-flow transfer and circulation where chemical resistance, compactness and abrasion tolerance are important. It is intended for engineers, OEM designers and maintenance teams that need predictable fluid handling while controlling leakage risk, process repeatability and service access. Selection should start from the required flow, differential and system pressure, viscosity, temperature, suction conditions and chemical compatibility.
The CA uses a 316 stainless-steel centrifugal hydraulic end with an integrated impeller-and-magnet assembly, reducing the number of rotating parts while retaining magnetic-drive containment. The magnetic coupling transfers torque without a conventional dynamic shaft seal in the liquid path, keeping the motor-side drive physically separated from the process liquid. This removes one common leakage and maintenance point while the hydraulic principle defines flow behaviour, pressure capability and suitability for the duty.
The current Micropump product data lists flow of 4.3–24 L/min, maximum head of 5.59 m and maximum system pressure of 14 bar. Temperature is −46 to +121 °C and viscosity is specified up to 100 cP. These published values describe the series or cited configuration rather than every possible order code. Final selection must confirm wetted materials, drive speed, connections, suction conditions and any application-specific limits.
For total cost of ownership, correct sizing and material selection are critical. Operating within verified limits supports predictable service intervals and reduces avoidable wear, while planned access to service parts helps maintenance teams control downtime risk. AxFlow can help identify the correct Micropump CA configuration, check availability and support replacement or OEM projects. Request a quote for Micropump CA from AxFlow.
