High pressure TEG injection
High-pressure injection of hot TEG in an ATEX zone.
System Description
The unit provides injection of triethylene glycol from the regeneration into the drying column. Due to the location of the system in ATEX Zone 2 and the injecting of hot TEG - the piston-diaphragm pump is equipped with an autonomous oil management that ensures circulation and filtration of the pump's hydraulic oil, including its air cooling. For connection to the technology, the unit is equipped with hose adapters with pressure measurement and an overflow line.
SYSTEM PARAMETERS
- Flow rate: 0.3 – 1.7 m³/h
- Pressure: 80 bar
- Accuracy: % (not specified)
- Medium: TEG
- Medium concentration: 100 %
- Medium temperature: 90 °C
- Viscosity: 35 cP
- Tank capacity: l (not specified)
- Height: 1.5 m
- Footprint: 2 × 1.5 m
- Weight: 750 kg
- Materials: SS304 / 316L
- Certifications: ATEX
Used components
Wanner Hydra-Cell G
Features
High-pressure injecting of hot medium in ATEX zone
Oil management with filtration, circulation and cooling
Outdoor design with electric heating and insulation
