PVR EU HWT 107-160-205

Description

PVR EU HWT 107-160-205 is intended for industrial vacuum duties with elevated water-vapour loads where condensation control is a key selection factor. The EU 107 HWT, EU 160 HWT and EU 205 HWT group uses PVR rotary-vane technology to provide a defined relationship between pumping speed and operating pressure, which is central to equipment sizing. For engineers and maintenance teams, the key decision is to match the required pressure, gas load, operating frequency and vapour content to the correct version rather than select on flow alone.An oversized circuit and gas ballast reduce condensation risk when larger quantities of vapour are pumped. From EU 160 HWT upward, cooling combines an air-oil heat exchanger with a centrifugal fan; AxFlow Czech lists an ATEX option for EU 160 HWT.Verified technical data for PVR EU HWT 107-160-205 includes 110, 152 and 205 m³/h at 50 Hz and an ultimate pressure of ≤0.8 mbar with gas ballast. PVR specifies 0.8–850 mbar absolute, except EU 160 HWT which is specified for 0.8–400 mbar. The published range also includes water-vapour pumping capacities of 9, 9 and 9.8 kg/h at 50 Hz. These datapoints provide a selection basis, but the final operating point must be checked against the exact pump version and process conditions.Oil-lubricated rotary vane construction combines continuous lubrication with defined gas handling and serviceable components. Features such as check valves, oil-mist separation and gas ballast where fitted help protect restart behaviour, exhaust cleanliness and vapour handling, which can reduce avoidable maintenance events. AxFlow can support product selection, service and spare parts for PVR EU HWT 107-160-205; planned maintenance and correct variant selection help control downtime risk, process continuity and total cost of ownership.

Construction

Performance

Min Capacity

110 m³/h

Max Capacity

205 m³/h

What is PVR EU HWT 107-160-205 used for?

PVR EU HWT 107-160-205 is intended for vacuum duties with elevated water-vapour loads. The correct version depends on required pressure, pumping speed and process gas conditions. AxFlow can support selection for the actual duty point.

What are the main technical data for PVR EU HWT 107-160-205?

Verified performance includes 110, 152 and 205 m³/h at 50 Hz and an ultimate pressure of ≤0.8 mbar with gas ballast. PVR specifies 0.8–850 mbar absolute, except EU 160 HWT which is specified for 0.8–400 mbar. The exact model, frequency and version should be confirmed before final selection.

What construction features matter on PVR EU HWT 107-160-205?

An oversized circuit and gas ballast reduce condensation risk when larger quantities of vapour are pumped; from EU 160 HWT upward, cooling combines an air-oil heat exchanger with a centrifugal fan; AxFlow Czech lists an ATEX option for EU 160 HWT. These features influence vapour handling, shutdown behaviour, exhaust management and service requirements. Their availability must be checked for the exact model version being specified.

How do I choose the correct PVR EU HWT 107-160-205 version?

Define the required absolute pressure, pumping speed, duty cycle, gas composition and water-vapour load first. Then compare those requirements with the published data for the exact model and any B, HWT, EX or monobloc variant. AxFlow can help confirm product selection and availability.

Can AxFlow provide service and spare parts for PVR EU HWT 107-160-205?

AxFlow can support service and spare parts for PVR vacuum equipment. The correct service items depend on the exact PVR EU HWT 107-160-205 version, operating hours and installed accessories. Provide the model designation and equipment details so the required parts and service scope can be identified.