
Johnson Pump KGE
The KGE is a self-priming centrifugal pump with a radial (semi-open or closed) impeller, overhung mounted on a bearing pedestal.
The KGE series is made up of models with the following drive possibilities:
KGE: pump with bare shaft for clockwise rotation
KGEL: pump with bare shaft for counter-clockwise rotation
KGEF: pump with flanged motor (close coupled)
Pumps in this serie are suitable for clean and polluted liquids, which are non-corrosive to cast iron, including water, oils, petrol and all kind of chemicals. Draining building excavations, emptying ponds, ditches and swimming pools, water extraction for irrigation and watering, aboard ships as bilge, deck wash, and general service pumps. Emptying pits and through containing wastewater, handling fuels, condensate extraction pumps.
- Self-priming
- Non-return valve mounted
- Oil bath for the mechanical seal (preventing seal from running dry)
- Dust-tight, grease lubricated bearings
- Suitable for a wide range of duties
- If a spacer type coupling is used, the pump can easily be dismantled without it being necessary to disturb the pipings or to move the motor.
Type | Centrifugal Pumps |
Seal | Mechanical Seal |
Materials | Cast Iron |
Coupled | Long |
Manufacturer |
Max. capacity | 100 m³/h |
Max. temperature | 95° |
Max. differential head/pressure | 8 |
Max. head | 60 |