Select country
Contact us
fluidity.nonstop fluidity
Rotary Vane Pumps

Rotary Vane Pumps

A rotary vane pump is a form of positive displacement pump consisting of vanes mounted on to a rotor that rotates inside the pump chamber. In some cases, these vanes can have variable length and/or be tensioned to maintain contact with the walls as the pump rotates.

Throughout all areas of process engineering and industry there are applications where the transfer of fluids requires a sensitive pumping action so as not to the damage or change the structure of the media being handled. Rotary vane pumps have been developed to address these issues and are equally adept at pumping gases.

2 series from 2 manufacturers

How does a Rotary Vane Pump work?

Standard rotary vane pumps operate on the principle of the eccentricity between the shaft and the pump casing bore (stator). Rotary vane pumps come in two types: the flexible vane and sliding vane.



                 Sliding Vane Pump Principle Image

Flexible vane pumps

In flexible vane pumps the vanes are made from a malleable material. The tips of the vanes used in flexible vane pump are lobe shaped and when rotating they flex in order to maintain contact with the walls of the stator, thereby trapping the fluid in small pockets or cavities. When the discharge pipe is reached the trapped fluid is released from the pockets.

Sliding vane pumps

In sliding vane pumps, the vanes are made from a rigid material and do not flex when rotating. The rigid vanes that are free to slide into or out of slots in the pump rotor by way of springs or pressure-activated pins in the rotor. As the rotor turns, the vanes move out of the rotor slots creating a void at the inlet port and drawing fluid in. The fluid is transferred from the inlet port to the discharge port between the vanes. At the outlet, the fluid is discharged and the pumping chamber is reduced and the vanes slide back into the rotor slots.

What are the benefits of Rotary Vane Pumps?

Rotary vane pumps deliver a gentle low shear action so that the structure of the pumped fluid is not affected.

By virtue of their inherent energy and mechanically efficient designs, positive displacement rotary and sliding vane pumps are perfectly suited to offering operators immediate high value advantages and solutions in fulfilling their energy saving initiatives. In reviewing a list of the most common system characteristics that need to be considered in pumping applications, positive displacement pumps outperform centrifugal pumps in almost all of them.

Depending on the technology chosen, rotary vane pumps may offer:

  • Ability to self-prime.
  • Constant flow that is relatively independent of changes in system pressure.
  • Constant flow that is relatively independent of changes in viscosity.
  • Ability to handle medium and low viscosity products.
  • Can handle thin liquids at relatively higher pressures.
  • Develop a good vacuum.
  • Ability to run dry for short periods.
  • Higher efficiency across varying system pressures.


Where can Rotary Vane Pumps be used?

Rotary vane pumps are used in many different applications due to their all-round versatility. Typical applications include fluids that display varying levels of viscosity, have high or low temperature levels, are non-lubricating or could be made from ingredients that can be aggressive and cause damage to the pump.

When it comes to light, non-lubricating fluids such as alcohols and solvents then vane pumps are very often the best solution as they are self-lubricating and can (with the correct design) cope with low net positive suction head (NPSH).

How to select the right Rotary Vane Pump?

When it comes to selecting a pumping system, the choice commonly comes down to rotary positive displacement and centrifugal types, as both types can often be used for the same applications.

If you have a relatively low flow and a relatively high-pressure requirement, or if you require the pump to be self-priming, then a vane pump will often be the best solution.

When selecting a rotary vane pump you should, among other things, consider whether it should be:

  • Using alternating or direct current
  • Oil-sealed or dry

Do you need help choosing the right pump for your industry and needs? Get in touch, our team of knowledgeable experts would be happy to advise you!

Eoin Cahill
Water & Wastewater, Power generation, Construction & Mining
Brian Coleman
Food & Beverage Sectors.
Brajan Saraci
Pharmaceutical, BioPharma, Chemical and Petrochemical Sectors
Product inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Solids Character
Product Shall Be
Special Requirements
Service inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Service type
Literature request

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

The literature I need
Spare part inquiry

STEP 2/3 - Detailed information

Please provide us with as much information as needed to help you better.

Contact information
I accept that info will be stored in AxFlow database and CRM Website Policy
An error has occurred while getting captcha image